Aluminum bronze
ALBROMET-A380
| Mechanical & physical Properties | forged / pressed | cast |
|---|---|---|
| Brinell hardness (HBW 10/3000) | 360 - 390 | 360 - 390 |
| Rockwell hardness (HRC, converted) | 38 - 42 | 38 - 42 |
| Tensile strength Rm in MPa | 700 - 1100 | 700 - 1100 |
| Yield strength RP0.2 in MPa | > 480 | > 480 |
| Elongation at break A5 | 0,5 % | 0,5 % |
| Thermal conductivity at 20° C in W/m*K | 34 | 34 |
Standards/specification
not standardized
(DIN EN 12163, DIN EN 12164, DIN EN 12420)
(DIN EN 1982)
~ C62500 (ASTM B505)
Material properties
Highest possible hardness (brittle hard), high abrasion resistance, excellent compressive strength, outstanding sliding properties, not suitable for impact and shock loads, low nickel content
Application examples
Sliding partners for hardened steel grades, forming tools for bending, embossing, profiling and deep drawing of steel sheets and steel tubes, especially stainless steel; rollers, dies
Processing
Mechanical processing only with carbide tools, very good polishability, limited weldability
The data is based on information from our suppliers, subject to change. The mechanical strength values are
typical guide values and depend on dimensions and type of manufacture.
